Image result for facebook logo
Like Us!
Join our mailing list!











  Home > MODS > Squonk Box Mods >

Project Sub-Ohm Edition Vandy Vape Simple EX MTL Squonk Starter Kit
project sub ohm vandy vape simple EX squonk klt


 


Description Project Sub-Ohm® Edition Vandy Vape Simple EX MTL Squonk Starter Kit Vandy Vape enters the scene with the collaboration of Project Sub-Ohm® and introduces the first ever squonk device that primarily uses Nicotine Salt E-Liquid, the Simple EX! The Simple EX features a 3.3 to 4.5 adjustable output voltage and comes paired with it's own matching rebuildable atomizer. The Project Sub-Ohm® Edition Simple EX features an beautiful frosted white magnetic bottom feed door cover that matches the top cap of the RDA along with a blue 4ml squonk bottle, fire button, and adjustment buttons. Located on the top of the device is the PSO serialization, making each device unique due to the limited quantity. Other Project Sub-Ohm® details and emblem can be found on each side of the device. The Vandy Vape Simple EX is powered by an 850mAh built in battery and can be charged via USB port. The Vandy Vape Simple EX is true to it's name, Simple. With a minimalist yet stylish design, the Simple EX measures at 42mm by 84mm by 58.5mm making it small and easy to carry. The Simple EX uses a 4ml Squonk bottle and is housed through a magnetic PC constructed bottom feed door. The Simple EX allows users to only change the output of the device from 3.3V, 3.6V, 3.9V, 4.2V, and 4.5V. The display of the Simple EX only displays the remaining battery life and the output voltage. Along with the Simple EX is the matching Simple EX 21mm RDA. The Simple EX RDA features a PC top cap but can be switched off with a stainless steel top cap that comes with the kit. The build deck of the Simple EX features a dual post, single 2mm by 3mm terminal build deck style designed to hold thinner gauge performance coils, and are held down by top mounted flat head screws. Located on the bottom of the Simple EX are six different airflow settings, all in which are adjustable via top cap. From largest to smallest; the 2.5mm airflow slot is meant for 4.5V and restricted direct lung hit. The following sizes are intended for use with MTL vaping: the 2.0mm airflow is meant for 4.2V and recommended to be used with 10 to 20mg salt nic, 1.5mm is meant for 3.9V and recommended to be used with 20 to 30mg salt nic, the 1.0mm airflow slot is meant for 3.6V and recommended to be used with 30 to 40mg salt nic, the 0.8mm airflow slot is meant for 3.3V and recommended to be used with 40 to 50mg salt nic, and finally, the 0.6mm airflow slot is meant for 3.3V and 50 to 60mg of salt nic. Located on the top of the Simple EX RDA is a 8mm bore drip tip that acts as a top cap. With the stainless steel top cap, users may change their drip tip with either a 4mm PC 510 drip tip or a 3mm Delrin 510 Drip Tip. Perfectly paired and amazingly SIMPLE, the Project Sub-Ohm® Edition Vandy Vape Simple EX MTL Squonk Starter Kit is an amazing and intuitive new squonk device that delivers the customization and the power output that we've all wanted from an ultra portable device. Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

EX Mod Product Features:
3.3 to 4.5 Output Voltage
0.8 to 3.0 ohm Atomizer Resistance Range
0.5 to 8.5 Voltage Output Range
OLED inch Screen
Diagonal Arrangement Output Voltage Battery Life Indicator
4ml Squonk Bottle Held by Magnetic Door Cover
Three Button Control Face
Oversized Firing Button
Dual Adjustment Buttons
Built-in 850 mAh Battery
USB Port
Stainless Steel Plated 510 Threading and Firing Pin
Spring Loaded Gold Plated Center Pin
Gold Plated Contact Points

Device Safety Features
Overtime Protection/Atomizer Checking/Low Power/Short Atomizer/High or Low Resistance
Warning/Overheat Protection

EX Mod Product Dimension:
42mm by 58.5mm by 24mm

EX RDA Product Features:
21mm Diameter Single Terminal Dual Post Build Deck
2mm by 3mm Top Mounted Flat Head Screws
PEEK Insulator
8mm Deep Juice Well
Adjustable Bottom Airflow Ports
Single Airflow 2.5mm
Recommended Voltage 4.5V 2.0mm
Recommended Voltage 4.2V 10 to 20mg
Recommended Nicotine Salt Use1.5mm
Recommended Voltage 3.9V 20 to 30mg
Recommended Nicotine Salt Use 1.0mm
Recommended Voltage 3.6V 30 to 40mg
Recommended Nicotine Salt Use 0.8mm
Recommended Voltage 3.3V 40 to 50mg
Recommended Nicotine Salt Use 0.6mm
Recommended Voltage 3.3V 50 to 60mg
Recommended Nicotine Salt Use
24K Gold Plated Bottom Feed
510 Contact 304 Stainless Steel
8mm Bore PC 510 Drip Tip
3mm Bore Delrin 510 Drip Tip
4mm Bore PC 510 Drip Tip

Product Includes:
One Simple EX Squonk Mod
One Simple EX RDA
One Stainless Steel Top Cap
One PC Drip Tip
One Delrin Drip Tip
One Instructional Manual
One Spare Parts Bag
Two Superfine MTL Fused Clapton Coils

*This device is strictly for ADVANCED USERS and it is NOT recommended for beginners or those who do not fully understand your battery's Amp Limits in correlation with your Atomizer's Resistance. Use new/genuine high drain batteries with this device. Please be aware that there is no low-voltage protection in this unregulated box, so be aware of what voltage your batteries are firing at. There is also no over-current protection, so keep in mind the amp limitations of your batteries as well. Use with extreme caution and always check your resistance with a meter (check often)! By purchasing the product, you agree that you are knowledgeable on how to properly use this product and that we are NOT responsible for any misuse or accidental malfunctions of this product.
Our Price: $79.99


Product Code: PROJECT-SUB-OHM-EX-MTL-SQUONK


Color*:
Project Sub Ohm Edition

Qty:  
RETURN POLICY Company Info PRODUCT INFO
 
Project Sub-Ohm Edition Vandy Vape Simple EX MTL Squonk Starter Kit Vandy Vape enters the scene with the collaboration of Project Sub-Ohm® and introduces the first ever squonk device that primarily uses Nicotine Salt E-Liquid.
RETURN POLICY
  • ALL PRODUCTS ARE COVERED BY FACTORY WARRANTY. If you have a problem with your device after purchase you will need to contact the manufacture. When you receive your device please fill out warranty card on product immediately. THERE ARE NO REFUNDS, EXCHANGES, OR RETURNS ON THIS PRODUCT. ONCE ORDER IS PLACED IT CANNOT BE CANCELED OR CHANGED ALL SALES ARE FINAL. NO EXCEPTIONS.

Share your knowledge of this product. Be the first to write a review »